OPERATING INSTRUCTIONS
1. Switch the cyclone mixer ON using the green rocker switch. The switch will
illuminate.
2. The mixing speed can be varied by turning the dial anticlockwise to decrease or
clockwise to increase the mixing intensity.
3. When placing the tube for mixing onto the Cyclone’s rubber cup always select a
slow speed and gradually adjust the dial to produce the desired vortex.
4. The Cyclone mixer can be operated in two ways - manually or automatic.
MANUAL MODE: press start operation providing instant action the
moment the tube is pressed into the rubber cup.
AUTOMATIC MODE: the rubber mixing cup rotates continuously.
CARE AND MAINTENANCE
Please ensure that the washing agent and sanitizing agent are BSI accredited and
approved by the H&S department for use on laboratory equipment and stainless steel
within your laboratory.
DISCONNECT THE MIXER FROM THE POWER SUPPLY PRIOR TO
CLEANING
Only use a damp cloth and mild detergent to wipe clean the outside surfaces.
Disconnect the unit from the mains electrical supply before cleaning. Ensure the unit is
completely dry.
PORTABLE APPLIANCE TESTING
These tests should be conducted by a qualified person.
DO NOT PAT test the boiling bath unless it contains water.
DO NOT Flash Test!!
CYCLONE MIXER CM-1
CLIFTON RANGE® - 3 YEAR WARRANTY
4
!
!
!
oc
