11
CHARGING
We recommend that you fully charge the speaker before using it for the first time to
maximize battery life. It takes approximately 2-3 hours to fully charge. An acoustic signal will
indicate a low battery. To charge the loudspeaker battery, connect the supplied micro USB
cable to the charging port (6) and connect it to any charging adapter (5V voltage and at least
1A output current) or to a USB in a PC. The charging progress is signalled by a flashing LED
below the button (1); when the battery is fully charged, the LED will stay lit. During charging,
the loudspeaker can be used for calls and music playback.
POWER ON / OFF
To turn the loudspeaker on or off, press and hold the button (1) for 3 seconds.
Note: To save power, the speaker turns off after 20 minutes of inactivity.
CONNECTING TO BLUETOOTH
1. Press the button (1) for 3 seconds to turn the loudspeaker on. The loudspeaker is now
in pairing mode for Bluetooth connectivity. Pairing mode is signalled by flashing of the
operating LED inside the button (4).
2. Activate Bluetooth on your device. Then select „Niceboy VOICE CALL BT PRO“ in the list
of available devices.
3. The device will connect to the loudspeaker. A successful pairing is signalled by an acous-
tic prompt and the operating LED in the button (4) will stay lit.
To disconnect the Bluetooth device, hold down the button (4) for 4 seconds.
CONNECTING TO A PC USING USB
Press the button (1) for 3 seconds to turn the loudspeaker on. Connect the supplied USB
receiver (8) to the USB slot on your PC. Niceboy VOICE CALL BT PRO is a Plug & Play device
and sets itself up as an audio output device and an audio input device. You can also use the
supplied charging cable or any other micro USB data cable to connect to a PC.
