Niceboy PILOT Q2 WIFI, Руководство пользователя

Страница: 15 / 72

15
video recording mode, photo capture mode and video playback
mode. Long-pressing in video playback mode gives access to options
to delete the video or protect it against accidental deletion. Pressing
the button during video recording will start an emergency recording -
this feature protects the video from accidental deletion. The video will
not be deleted even if the memory card is full.
9. Up/Wi-Fi button – a short press navigates in the camera‘s menu. A
long press in standby mode turns the Wi-Fi connection on/off.
10. OK button – pressing this button while in a menu confirms a
selected item. When in video mode, the button will start/stop video
recording. When in photo mode, press the button to take a photo.
11. Down/microphone button – a short press navigates in the
camera‘s menu. Pressing the button in standby mode turns the
microphone on/off.
12. Reset - restarts the camera if needed.
13. SD slot – slot for inserting the memory card
14. Slot for mount – used for attaching the mount to a car window
CAMERA MENU LANGUAGE SETTING
Connect the camera to a power source. Turn on the camera and long-
-press button (8) to access the camera‘s menu. Then short press button
(8) again to access settings. Use button (11) to navigate to Language and
confirm by pressing OK (10). Then, select your preferred menu language
and confirm with OK (10).
VIDEO MODE SETTINGS
Resolution: resolution setting for recorded video.
Exposure: exposure compensation settings. The higher the positive
value, the brighter the video; the lower the negative value, the darker the
video.
Motion Detection: If the camera detects movement in front of the
camera, it starts recording (applies if the function is active); when the
movement stops, the recording will also stop. Use this function only when
the vehicle is stationary. Motion detection only works when the camera is
switched on and the video loop function is deactivated.
Video Loop: sets cyclic (loop) recording, i.e. time periods during which
videos will be recorded. When the memory card is full, the oldest recor-
dings will be erased (except for locked videos captured during emergency
recording).
Sound Recording: turns the camera microphone on/off.
Time Stamp: turns the option to add date and time information into the
video on/off.