Niceboy ION ORBIS Windows & Door, Руководство пользователя

Страница: 21 / 108

21
QUICK SETUP
1. Before activating the accessory, please make sure you
have the Niceboy ION app downloaded and Niceboy
ION ORBIS Bridge installed.
2. Insert the battery inside the sensor unit (CR2 type).
Then hold the reset button for 5 seconds until the
indicator light starts flashing rapidly.
3. There are two methods to add the device
a. Open the Niceboy ION app, tap “Home” and then
open Niceboy ION ORBIS Bridge. Click on „Zigbee
devices list“, then on „Add device“ and then on „Add
new devices“. The app will start looking for nearby
devices. Once the device is found, it will appear on the
screen. Click on the device and add it to your app.
b. Open the Niceboy ION app, and then tap “+” in the
top right corner to enter “Add Device page“. Select
“Sensors”, then click on „Door & Widnow sensor“
and choose the Zigbee gateway (Niceboy ION ORBIS
Bridge). Confirm that you inserted batteries, reseted
the device and that its blinking rapidly (step 2). The
app will start looking for a new device. Once the
device is found, just add it to the app.