50
figure.
7. After the start-up tone is finished,long press the Start/Stop button on the panel for more
than 5s till the buzzer beeps and WiFi LED indicator flashes.
8. Make sure the name of your home WiFi, and enter the WiFi password and click on NEXT
(note: only 2.4G WiFi is available), as shown in the figure.
9. Make sure the WiFi LED indicator is flashing, and check „Confirm indicator rapidly blink“,
and click on NEXT for network connection and on Finish after device is added successfully.
It may take several or dozens of seconds to connect the device to WiFi network, depending
on the signal strength. A control interface will be displayed when the device is bound
successfully.
Reset WiFi
: In case of connection timeout or before connecting another cell phone, first switch
on the device and, within 10 seconds, long press the Start/Stop button for 5 seconds till it
beeps, and then re-connect it to WiFi network. After the password is set, proceed to the next
step „Add Device“
MAINTENANCE
Dust collector and filter screen cleaning
Take out the dust collector.
Open the dust collector lock and pour the dust and garbage.
