17
- English
EN
When the transmitter is used for the first time, the receiver will memorise the
new priority level received
and
ignore any command sent by the lost or stolen transmitter, should it be used. The priority can be changed
through the O-Box programmer.
By default the receiver has the “Priority” function enabled, so the installer can exploit its potential applications.
Nonetheless, the O-Box programmer can be used to lock (or release) the receiver in managing this function.
4.2 - Enabling (or disabling) reception of the transmitter codes, modified with respect to the default
code
The codes of transmitters with “FloR” and “O-Code” encoding system can be modified as desired using the
O-Box or O-View programmer. By enabling or disabling this function, the receiver can accept or refuse the
command of a transmitter with modified identification code (the default setting is ON).
4.3 - Disabling (or enabling) the “variable part” (rolling code) of the code received
The receiver is programmed by default to only receive “rolling code”-type codes. The O-Box programmer,
however, can be used to programme the receiver so that it ignores the variable part (rolling code) of the code
received and considers it as a “fixed”-type code.
4.4 - “Transmitter keys release” function” (only with O-Code encoding)
During normal use of the transmitter, when a pressed key is released the automation’s manoeuvre continues
for a short pre-set time. If the manoeuvre must be interrupted exactly when the key is released (for example,
to perform a minor adjustment), this function must be enabled in the receiver through the O-Box programmer.
This function is disabled by default.
4.5 - Enabling (or disabling) the receivers to send/receive radio commands through the BUST4 net-
work that connects two or more automations
If one of the automations in systems containing multiple automations connected through the “BusT4” must be
commanded from a distance exceeding the radio range of the transmitter-receiver system, this function can
