English –
4
A.1 - AUTOMATIC Programming of the UP (“0”) and DOWN (“1”) limit switches
NOTES AND WARNINGS
• Use this procedure only for roller shutters equipped with mechanical locking devices.
• Programme the UP limit switch (0) FIRST.
• The down limit switch (1) is NOT memorised if it is within 120° with respect to the UP limit switch (0).
• After programming the limit switches, the
s
key will command the
Up
manoeuvre and the
t
switch will command the
Down
manoeuvre. The movement of the roller
shutter will be limited by limit switches (Upper “0” and Lower “1”) programmed by the installer.
1
2
Command
an UP
manoeuvre
START
STOP
2
&
“
0
”
Hold down the button ... (
Note
- if the move-
ment is interrupted briefly 2 times this means
that no limit switch positions have been memo-
rised).
... count 2 START & STOP move-
ments ...
... lift the roller shutter up to the upper stop.
The motor will disengage automatically once the stop
is reached.
2
end
Command
a DOWN
manoeuvre
START
STOP
1
&
“
1
”
Hold down the button ...
... count 1 START & STOP move-
ment ...
... lower the roller shutter down to the lower stop.
The motor will disengage automatically once the stop
is reached.
A.2 - MANUAL programming of the UP (“0”) and DOWN (“1”) limit switches
NOTES AND WARNINGS
• This procedure is obligatory only for roller shutters without a mechanical stop.
•
Programme the UP limit switch (0) FIRST.
• the down limit switch (1) is NOT memorised if it is within 120° with respect to the UP limit switch (0)
• After programming the limit switches, the
s
key will command the
Up
manoeuvre and the
t
switch will command the
Down
manoeuvre. The movement of the roller
shutter will be limited by limit switches (Upper “0” and Lower “1”) programmed by the installer.
1
2
3
Command
an UP
manoeuvre
START
STOP
2
&
“
0
”
=
3
sec
2
Hold down the button ... (
Note
- if
the movement is interrupted brief-
ly 2 times this means that no limit
switch positions have been mem-
orised).
... count 2 START & STOP
movements ...
... release the button as soon as the
roller shutter reaches
position “0”
(
UP
limit switch).
Hold down both
buttons...
count 2 movements;
release them after
3 seconds
.
3
4
end
Command
a DOWN
manoeuvre
START
STOP
1
&
“
1
”
=
3
sec
2
Hold down the button ... (
Note
- if the movement is interrupted
briefly 1 time this means that only
one limit switch position has been
memorised).
... count 1 START & STOP
movement ...
release the button as soon as the
roller shutter reaches
position “1”
(
DOWN
limit switch).
Hold down both
buttons...
count 2 movements;
release them after
3 seconds
.
