This procedure works for NICE remotes. For this
setting make sure all “Prog” switches are in the
OFF position (all down) as shown below:
Remote Control Configuration Options:
Note that you have 2 buttons available (A, B) on each remote control.
Let’s assume that each control will have different settings, as follows:
LED BLINKS
1 time
2 times
3 times
BUTTON/
PULSE
JUST OPENS
(OPEN)
JUST CLOSE
(CLOSE)
4 times
5 times
-
ONLY STOP
(STOP)
PARTIAL OPENING
-
1st CASE
- Just a button with a function.
2nd CASE
- Two buttons with the same
function.
3rd CASE
- Two buttons with different
functions.
A
B
1st CASE:
1- Press the LEARN button once and watch the LED flash 1 time
intermittently;
2- Choose which function you want to achieve by clicking or not one
or more times always watching the LED;
3-Choose button A or B on the remote control and press;
4- Press the same button again.
5- Control configured successfully, make a trigger test.
2nd CASE:
1- Press the LEARN button once and watch the LED flash 1 time
70
ENGLISH
