TITAN 912L Linear Actuator
Installation Reference Manual
17
17
IMAGE 9C-2:
1050 BOARD - PULL-TO-OPEN - DUAL GATE
IMAGE 9C-1:
1050 BOARD - PULL-TO-OPEN - SINGLE GATE
9C
1050 CONTROL BOARD WIRING: PULL-TO-OPEN
5.3 1050 CONTROL BOARD WIRING: PULL-TO-OPEN
MOTOR 1
MOTOR 1
MOTOR 1
MOTOR 1
MOTOR 2
MOTOR 2
YELLOW
YELLOW
YELLOW
GREEN
GREEN
GREEN
BLUE
BLUE
BLUE
ORANGE
ORANGE
ORANGE
WHITE
WHITE
WHITE
BLACK
BLACK
BLACK
RED
RED
RED
WIRE 2nd ACTUATOR
WITH LONGER HARNESS
TO MOTOR 2
IMPORTANT!
For dual gate systems, wire the 2nd
harness into the connector, but do
not
connect it to the control board
yet. It will be connected at a later step.
NOTICE
’
If gate moves opposite direction from expected, reverse red & black wires in that motor connector.
’
In dual gate systems, the longer actuator cable is usually connected to MOTOR 2.
www.ApolloGateOpeners.com | (800) 878-7829 | [email protected]
