Nice E Fit M 720, Инструкции и предупреждения по установке и использованию

Страница: 24 / 32

A.2 - Temporarily deactivating (and reactivating) motors you do not wish to program
NOTES AND WARNINGS
•
This procedure temporarily deactivates (for 5 minutes) only motors whose up and down limit switches have already been programmed.
A.2.1 - To temporarily deactivate motors you do not wish to program
1 2
end
ESC
= 5 sec
ESC
“
0
”
The system locks out only those motors whose lim-
it switches have already been programmed. It has
no effect on motors which have not yet been pro-
grammed.
The deactivation is temporary and lasts for 5
minutes.
Hold down the but-
ton and release it after 5 sec-
onds ;
you will see a brief down
movement and a movement
which stops the awning at
the Up limit “0”. For a period of 5 minutes, the locked out motors will
not respond to commands.
A.2.2 - To reactivate temporarily locked out motors
You can reactivate the motors in two ways
option –
A
1
end
option –
B
1
end
After 5 minutes the
locked out motors are
automatically reactivat-
ed by the system.
During the 5 minute
period
the locked out
motors can be reacti-
vated at any time by the
user.
ESC
= 10 sec
ESC
Wait for
5 minutes
... ... the system will then
move the awning to
the mid position. During the
5 minutes
, at
any time...
... hold down the
button and release it after
10
seconds ;
the system will then
move the awning to
the mid position.
A
A.3 - MANUAL programming of the UP (“0”) and DOWN (“1”) limit switches
NOTES AND WARNINGS
• This procedure is obligatory only for awnings without a mechanical stop at the Up position.
• This procedure can be used if the limit switches have been programmed using the semiautomatic procedure (A.4).
• After the limit positions have been programmed, the awning can be controlled by simply pressing the appropriate buttons on the control unit. The awning will move
between the positions set with procedures A.3.1 and A.3.2.
A.3.1 - To program the UP limit switch (“0”)
1 2 3
continues

(x
1
)
PRG
2
= 5 sec
2
Command
an UP
movement

Press and re-
lease the button (
1
time );
count 2 movements. Hold down the but-
ton and release it after 5
seconds
;
count 2 movements. Hold down the button and wait...
 3
4 5
fine
“
0
”
↕
Finely adjust-
ing the posi-
tion of limit
switch “0”

“
0
”
=
5
sec
3
... release the button as soon as the awning
reaches
position “0” ( UP limit switch).
Press the buttons until you reach the desired position.
Alternatively , for more accurate adjustment, run pro-
cedure B.1.
Hold down the
button and release it after
5
seconds ;
count 3 movements.
A
7
– English