Nice DTX600, Инструкции и предупреждения по установке и использованию

Страница: 29 / 64

English – 10
English
... Step 10 Step 11 ...
sel
•
fast
flashing = function
selected
(4)
ok
slow flashing
• slow flashing = function deselected
several times ...... ....... to select / deselect the function confirm PARTIAL MANOEUVRE
... Step 11 Step 12
(5)
...
sel •
fast
flashing = function
selected
ok
example:
• slow flashing = function deselected
several times ...... ....... to select / deselect the function confirm TIME Part. Man.
(6)
select the TIME Part. Man.
(7)
... Step 12 Step 13 Step 14 Step 15
- end
ok ok
Prog
NEW U
stop/esc
main
screen
Auto
confirm
(8)
(display = set values) confirm
(9)
(display) several times ... (display)
NOTES:
(1) -
The following days are available: Su = Sunday; Mo = Monday; Tu = Tuesday; We = Wednesday; Th = Thursday; Fr = Friday; Sa = Saturday. To add other DAYS to the
first one, repeat Step 7 for each day you wish to add.
(2) - To add other GROUPS to the first one, repeat Step 8 for each group you wish to add.
(3) - Caution!
– if you wish to activate the special “
on vacation
” function you need to set its parameters first, using
Procedure 4
.
(4) - Caution! – if you wish to activate the special “ planetary time ” function you need to set its parameters first, using Procedure 5 .
(5) -
The system only displays Step 12 if you have enabled the special “
partial manoeuvre
” function in Step 11.
(6) - Time of the Partial Manoeuvre.
(7) -
Set the (required) time between sending the manoeuvre and the time when the automated system blocks the movement of the shutter or awning so as to obtain their
partial opening/closing.
(8) -
If, when you press “
ok
”, the system flashes “
Err1
”, this means that the memory is full (100 events already memorized) and the new event cannot be memorized.
(9) - When you press “ ok ”, the system memorizes the new event and “ NEW ” starts flashing again on the display (Step 14) to show that the transmitter is ready for you to
programme a new event. To program a new event, repeat
Procedure 6
from Step 4 onwards, otherwise, to quit programming mode and return to the main screen,
execute Step 15.