Nice Apollo 4300 SW, Руководство пользователя

Страница: 4 / 32

2
CAUTIONS AND NOTES
This instruction manual is intended to aid the installer in the overall process
of correct installation at the desired location. Periodically, the manual will illus-
trate “warnings, cautions and notes” which are items the installer should care-
fully read to prevent damage to the gate, gate system or personal injury to
yourself or others.
EXTREMELY IMPORTANT
Anyone who installs, assists with installation or otherwise facilitates the instal-
lation in any manner should thoroughly read and understand this manual in its
entirety before any attempt is made to actually begin the installation process.
ETL DEFINITIONS COMPLIANT TO UL325
Vehicular Swing-Gate Operator (or system) - A vehicular gate operator (or sys-
tem)that controls a gate which slides in a horizontal direction that is intended
for use for vehicular entrance or exit to a drive, parking lot, or the like.
q &@SD LNUHMFA@QQHDQRTBG@R@RKHCHMFRVHMFHMFQ@HRHMFKNVDQHMFQNKK -
ing, or like barrier that is a stand-alone passage barrier or is that portion of
a wall or fence system that controls entrance and/or egress by persons or
UDGHBKDR@MCBNLOKDSDRSGDODQHLDSDQNE@CDjMDC@QD@
q 1DRHCDMSH@K5DGHBTK@Q&@SD.ODQ@SNQ"K@RR( UDGHBTK@QF@SDNODQ@SNQNQ
system) intended for use in a home of one to four single family dwellings, or
a garage or parking area associated therewith.
q "NLLDQBH@K&DMDQ@K BBDRR5DGHBTK@Q&@SD.ODQ@SNQ"K@RR(( UDGHBT -
lar gate operator (or system) intended for use in a commercial location or
ATHKCHMFRTBG@R@LTKSHE@LHKXGNTRHMFTMHSjUDNQLNQDRHMFKDE@LHKXTMHSR
hotel, garages, retail store, or other buildings servicing the general public.
q "NLLDQBH@K&DMDQ@K BBDRR5DGHBTK@Q&@SD.ODQ@SNQ"K@RR((( UDGHB -
ular gate operator (or system) intended for use in an industrial location,
loading dock area, or other location not intended to service the general
public.
q "NLLDQBH@K&DMDQ@K BBDRR5DGHBTK@Q&@SD.ODQ@SNQ"K@RR(5 UDGHB -
ular gate operator (or system) intended for use in a guarded industrial loca-
tion or buildings such as airport security area or other restricted access
locations not servicing the general public, in which unauthorized access is
prevented via supervision by security personnel.
1 - OVERVIEW
q Available in 1 and ½ HP models
q,@WF@SDVDHFGSKARGOLNCDK@MCKARGOLNCD
q Max gate length – 20’
q Key-lock access to the mechanical release and limit switch adjustments
q!THKSHMNODM@MCBKNRDKHLHSRVHSBGDR@MCSGDBNMSQNKKDQRfKD@QMtETMBSHNM
helps ensure a quick installation
q-TLDQNTRHMOTSR@MCNTSOTSRENQ@BBDRRNQHDR@QD@U@HK@AKD
The new Apollo 4300SW and 4500SW line of commercial gate operators are
pre-built on the legacy of rugged, reliable ranch and residential gate control-
lers offered by Apollo over the last 20 years. With an endurance of over
500,000 cycles, and a working temperature range from -4°F to 150°F, these
½ and 1 horsepower systems, can safely move gates up to 1000lbs. and
20’ in length. An industrial design ensures that the Apollo 4300SW and
4500SW gate operators complement any gate installation and architecture
while providing the safety features that meet or exceed UL325 and UL991
RODBHjB@SHNMR
This manual provides documentation that covers the layout, construction,
mechanical, electrical installation, and programming of the Apollo 4300SW
and 4500SW gate operator for a typical installation. Please consult your
Apollo distributor for more information regarding installations or questions not
RODBHjB@KKXBNUDQDCHMSGHRL@MT@K
Easy-step programming and numerous inputs and outputs for accessories
L@JDSGHRBNMSQNKAN@QCRHLOKDSNBNMjFTQD
1.1 - Gate controller
The gate controller is a 120VAC powered system consisting of the main hous-
ing, the chassis, a brushed DC motor, a transformer, an on-off switch, and the
main control board. A key-locked manual release and adjustable open and
close limit switches are located in a weather-tight enclosure that is accessible
at the top of the unit. The main control board is mounted on a tilt-up frame
that is accessed by removing the front cover. An access hole is located at the
bottom of the unit for connection with an electrical conduit.
1.2 - Main control board
The 1050 main control board is housed in a protective plastic enclosure that
includes a 2-line LCD and with 5 dedicated buttons and 3 buttons for navi-
gation of the setup, programming, and information menus. Connectors for
power, inputs, and output peripherals are arranged around the edges of the
board and clearly labeled. A plug-in connector is provided for direct installa-
tion of a Nice-brand receiver which can be controlled by up to 1000 transmit-
ters. The O-view programmer with Bluetooth and GSM provides capability
can be used to control and manage the unit via PDA. Connectors for other
Nice-brand plug in accessories include Bluetooth with GSM control for gate
management via PC, PDA, or cell phone. These accessory options enable
the Apollo 4300SW and 4500SW gate operators to expand their capabilities
in the future as necessary without requiring any hardware changes.
Dry contact inputs are provided for loop, probe, and photoelectric detectors,
@RVDKK@RDCFDRDMRNQRFT@QCRS@SHNM@MCjQDCDO@QSLDMSBNMSQNKNEF@SD
opening and closing. Voltage outputs (+12VDC and +24VDC) are also pro-
vided to power safety and entrapment-prevention devices, and a magnetic
lock if required. Onboard charge control circuitry delivers reliable power to
a backup battery (if installed) and the unit is equipped with input for a solar
panel for self-powered installations.
The 1050 main control board can drive 12VDC or 24VDC motors and accepts
DC input voltage ranging from 10VDC to 35VDC. A 2-line LCD with dedicated
buttons allows the installer to quickly program the 1050 when changes to its
factory-default settings need to be made. A real time clock/calendar enables
programming for scheduled weekly or daily events like opening, closing, or
locking the gate. Gate opening and closing speed, acceleration, soft-start
settings, and reversing force may be set to factory default settings, or indi-
vidually programmed per customized gate installation requirements. Built-in
current sensing enables inherent gate force monitoring and limiting for safety
and an onboard alarm indicates when two sequential obstructions have been
sensed in either direction. The “Learn” function helps the gate installer con-
jFTQDSGD ONKKN26@MC26F@SDNODQ@SNQRDLH@TSNL@SHB@KKXENQ
optimum settings of gate opening and closing speeds, with simple program-
mable adjustments to force and speed settings that may be made with front
panel programming.
0DLQFRQWUROERDUGVSHFLƄFV
q (MOTSRENQRNK@QO@MDK@MCA@SSDQHDR
q +NVONVDQBNMRTLOSHNMHMRS@MCAXLNCD
q !THKSHMQDFTK@SNQSNJDDOSGDA@SSDQXBG@QFDCDHSGDQSGQTRNK@QNQL@HM
power).
q 2NBJDSENQOKTFHM-HBDQDBDHUDQR2,RDQHDR
q !N@QCBNLO@SHAKDVHSG-HBD.ODQ@2XRSDLOQNFQ@L@MCCH@FMNRSHB@KRN
away from the site of installation).
q $@RXOQNFQ@LL"#CHROK@X@MCCDCHB@SDCATSSNMR
q #HFHS@KOQNFQ@LLHMFENQ@TSNBKNRDENQBDRODDCNODMHMFCDK@X
q .MAN@QCATSSNMRENQNODQ@SHMFSGDF@SD.ODM"KNRD2SNO
q !THKSHMUNKSLDSDQSNBGDBJHMOTSUNKS@FDA@SSDQXUNKS@FDRNK@QO@MDKUNKS -
age, motors’ current.
q 3DLODQ@STQDRDMRNQSNNOSHLHYDBG@QFHMFA@SSDQX@MCRXRSDLODQENQL@MBD
q /QNFQ@LL@AKDRDQUHBD@K@QL
q /QNFQ@LL@AKDSHLDQREQNLRDBSNGNTQR
q (MOTSRENQFT@QCRS@SHNM@CCHSHNM@KSGHQCO@QSXQDBDHUDQRKNNOCDSDBSNQR
FIRE and UL/Edge signals.
q OQNFQ@LL@AKDHMOTSRNODMBKNRDRSDOLHCONRHSHNMGNKCSNNODMGNKC
to close, activating timer).
q 2TQFDRTOOQDRRHNMNMDUDQXODQHOGDQ@KHMOTSCHFHS@K@MC@M@KNF
q /NQSRENQRDKEONVDQDC-HBDOKTFHMODQHOGDQ@KR!KTD!TR
q ,@RSDQ2K@UDATRONQSENQVHQDCBNMSQNKNE@RDBNMC26@MC26
gate operator.