Nibe FLM 40, Инструкция по установке и обслуживанию

Страница: 6 / 24

4 NIBE FLM 40
For Home Owners
LEK
63
LEK
63
The exhaust air module’s air filter should be cleaned regu-
larly (about 4-5 times a year) by taking it out and shaking
off any dirt. If the filter is very dirty, turn it upside-down
and wash it carefully with water.
Open the front cover by pulling it out by the lower
■
edge, then lifting it up.
Set the switch (8) to ”
■
0
”.
Disconnect the connector (22) from the fan speed
■
switch.
Release the filter holder by turning the two black knobs
■
a quarter of a turn anti-clockwise.
Pull out the holder, take out the filter (63) and shake
■
off any dirt. Check that the filter is not damaged. New
original filters can be ordered from NIBE.
■
Carry out assembly in reverse order.
The interval between cleaning operations varies and de-
pends on the amount of dust in the exhaust air.
Gammalt
3
2
1
TRYCK
1
TRYCK
2
DRAG
1
4 5
93
3
2 1
4 5
1
TRYCK
1
TRYCK
2
DRAG
1
Drücken
1
Drücken
2
Ziehen
1
Drücken
1
Drücken
2
Ziehen
FLM 40 and its ventilation ducting require some regular maintenance where the following points should be checked:
The numbers in brackets refer to the section “List of components”.
Cleaning the air filter
Cleaning the fan
Switch (8)
Avoid distorting the fan blades as
this causes imbalance.
Do not use water or detergents.
NOTE!
Maintenance routines
Clean the fan once a year by taking it out of the exhaust
air module and carefully brushing the vanes clean.
Open the front cover by pulling it out by the lower
■
edge, then lifting it up.
Set the switch (8) to “0”.
■
Disconnect the connector (22) from the fan speed
■
switch.
Dismantle the inner cover by loosening the 6 cover
■
screws.
The fan is removed by disconnecting the fan cable con-
■
nector and the two screws as illustrated.
Once the inner cover has been removed also check the
■
drip-pan under the heat exchanger. Also check the out-
let from the drip-pan (98) to ensure it is not blocked.
Assembly takes place in the reverse order.
■
Pull
Pull
Press
Press
Press
Press