GB
15
Loosen the left screw on the plate at the grate
control. Install the temperature sensor in the
hole as illustrated.
Install the mounting plate in the stove, as illustrated. Use the
supplied nut in the upper hole and the existing screw in the lower
hole. Then screw the vibration dampers onto the mounting plate.
Install the fan in the base as illustrated. Ensure that it is
straight and secure and that it is supported against the back
plate with the rubber strip. Adjust the height of the rubber foot
so that the exhaust is approx 10 mm above the hearth bottom.
!
The temperature sensor must only
be attached using cable terminals.
Impacts on the cable sheath are
potentially lethal.
!
In case of not using the fire over
a longer period (e.g. during the
summer) please unplug the fan.
This is to protect the fan’s sensitive
electronics against lightning strike.
Содержание Flakt Contura C600
Страница 2: ......
