13
EMINENT
Dimensions and location of components
List of components
1 Power cord with earthed plug, length 850 mm
2 Plastic cover, electrical connection box
3 Plastic cover, anode (EMINENT-E)
5
Thermostat/temperature limiter
6
Immersion heater
12 Hanging bracket
13 Securing bracket
22 Shutoff/non-return valve
23 Safety/drainage valve
25 Mixing valve
40 Sacrificial anode (EMINENT-E)
41 Cold water connection, compression fitting
Ø15 mm
42 Hot water connection, compression fitting Ø15 mm
43 Connection safety/drainage valve, compression ring
coupling Ø15 mm
45 Venting screw (for air supply when draining)
95 Serial number sticker
455
EMINENT 35 = 565
EMINENT 55 = 750
EMINENT 100 = 1120
1
45
42
25
41
22
43
23
2
5
40
min 200
*
95
84
455
EMINENT 35 = 565
EMINENT 55 = 750
EMINENT 100 = 1120
1
45
42
25
41
22
43
23
2
5
40
**
min 200
*
95
84
Till PBD
Till MOS
EMINENT-R 120 = 1304
EMINENT-R 120 = 1304
184
467
54 40
3
6
184
467
54 40
3
D
E
*
min 200
F
A
Till KBR
C
B
54 40
min ???
min 145
min 145
12
12
The serial number (95)
,should always be stated
with all correspondence with NIBE.
072 _ _ _ _ _ _ _ _ _ _ _
This appliance can be used by children aged from 8 years and above and per-
sons with reduced physical, sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or instruction concer-
ning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user maintenance
shall not be made by children without supervision.
Rights to make any design or technical modifications are reserved.
©NIBE 2015.
INSTALLATION AND MAINTENANCE INSTRUCTIONS
EMINENT
E/CU/R 35, 55, 100, 120
* Required space (EMINENT-E) for replacing/checking the
sacrificial anode.
35 litres:
180 mm
55 litres:
250 mm
100 litres:
390 mm
The chain anode can be used for vertical hanging in-
stallation, which only requires 180 mm above the water
heater.
