Removing the insulation
The insulation can be removed to facilitate handling in
confined spaces.
■
Lift off the plastic top and the top insulation.
■
On EKS 500, the lifting eye on the top must be un-
screwed first.
■
Remove the joining plates holding the insulated jacket
halves together.
■
Unhook and remove the insulated jacket halves, the
outer diameter of the heater becomes approx. 200
mm less without the insulated jackets.
Insulation removed
Do not use any tools when dismant-
ling the joining plate.
The figure shows EKS 500 with insu-
lation.
U
N
U
N
EKS
Carry out assembly in reverse order.
Install the enclosed insulation plugs around each connec-
tion, and in the hole for the lifting eye on EKS 500. Finally,
fit all the enclosed cover discs on each connection by
pressing them over the connections.
NOTE
Fit the cover discs and the insulation plugs be-
fore installing the pipe.
NOTE
In certain cases, more insulation plugs are en-
closed than are required.
19
EKS 500 NL, EKS 1000 Exkl. El | GB
