For the Installer
General
The water heater consists of a steel vessel, with a copper
lining to protect against corrosion.
The water heater is designed and manufactured for a
maximum cut-off pressure of 10 bar.
Maximum permitted temperature is 90 °C.
The insulation on EKS 500, and EKS 1000 comprises
Neopor and polyester fleece with a thickness of 100 mm,
which provides excellent heat insulation. The insulation
and grey plastic outer cladding can be removed easily
to simplify moving the water heater through doorways,
for example.
Transport
EKS 500 NL, EKS 1000 Exkl. El should be transported and
stored vertically in a dry place. The EKS 500 NL,
EKS 1000 Exkl. El may, however, be carefully laid on its
back when being moved into a building.
R
0
+ 2
0
-2
1
R
0
H M flo w
4 9 (5 0 )
°C
H o t w a te r 5 1
°C
+
2
0
-
2
1
R
0
H
M
f
lo
w4
9
(
5
0
)
°
C
H
o
t
w
a
te
r
5
1
°C
R
0
R
0
+ 2
0
-2
1
R
0
H M flo w
4 9 (5 0 )
°C
H o t w a te r 5 1
°C
+
2
0
-
2
1
R
0
H
M
f
lo
w4
9
(
5
0
)
°
C
H
o
t
w
a
te
r
5
1
°C
R
0
Assembly
The water heater is only designed for upright installation.
The water heater is unscrewed from the pallet and lifted
into position, using the lifting eye.
EKS 500 is equipped with a lifting eye in the top.
The top insulation must be removed to access the lifting
eyes on the EKS 1000.
Position EKS 500 NL, EKS 1000 Exkl. El on a firm base that
can take the weight, preferably on a concrete floor or
foundation. Use the product's adjustable feet to obtain
a horizontal and stable set-up.
The area where EKS 500 NL, EKS 1000 Exkl. El is located
must be equipped with floor drainage.
30 - 50 mm
30 - 50 mm
15 - 40 mm
20-55 mm
Supplied components
Cover discs
Drain valve with plug
Plastic cover
Insulation plug
17
EKS 500 NL, EKS 1000 Exkl. El | GB
