Nibe DKI 10, Руководство по установке

Страница: 9 / 28

General
This accessory is used when F730/F750 is installed in
areas with low ceilings or when one for some reason
wishes to split the heat pump.
To be able to open the service hatch of the air treatment
section it should be placed to the left of the heater
section.
We recommend that the accessory BAU 10 is used to
make it possible to install the air treatment unit to the
left of the water heater unit.
TIP
See installer manual for F730/F750 for more
information about the heat pump and its install-
ation. Documentation can be downloaded from
nibe.eu .
TIP
To prevent unnecessary heat losses insulate
the flexible pipes.
CONTENTS
Top panel 1 x
Protective panel 1 x
Flexible pipe 2 x
Wiring 3 x
Condensation hose 1 x
Screw M5x9 8 x
Screw M5x16 2 x
Nuts 2 x
Locking clips 8 x
Locking lugs 2 x
O-rings 16 x
Cable ties 1 x
Cable tie with clips 5 x
Bleed valves 2 x
9 DKI 10 | GB
English