GB
9
Tap out the knock out inside the stove leg.
Thread the control box and the plug through the rear panels.
Stoves with dampers must not
be equipped with a fan!
!
!
In case of not using the fire over
a longer period (e.g. during the
summer) please unplug the fan.
This is to protect the fan’s sensitive
electronics against lightning strike.
Installing the fan
Insert the fan in the rectangular opening in the hearth. The
rear edge of the fan must be supported against the edge of
the opening. Check that the rubber strip on the fan is against
the edge of the opening in the foot plate otherwise noise will
occur.
The fan has a 230V power supply, ignoring
the instructions is potentially lethal. The
fan or its components must not be worked
on. Impacts on the cable sheaths are
potentially lethal. If there is a fault in the
fan it must be returned to the place of
purchase.
!
C500 Style
C600 Style
510/ 520S/T/ 556
62 mm
590/ 596
160 mm
610/ 620T
65 mm
690
175 mm
