Nibco RHP-1, Инструкция по установке и эксплуатации

Страница: 8 / 29

Installation and Operation Manual Radiant Heat Panel
8
RHP-1&2 0511
Parts Legend :
1. Thermostat
2. Pump
3. Power Box with transformer, relay and integral timer
4. Temperature Gauge
5. Mixing Valve
6. Thermostat jack and auxiliary contacts
The room thermostat is the controller that signals the circulator and has an internal air sensor
which monitors the temperature. Some thermostats include a limitation sensor which should be in a
protective sleeve (such as a short piece of PEX) when placed in a slab. If your thermostat has a floor
sensor, you have two options when controlling temperature. One option is to use the floor sensor to
ensure the set maximum temperature is not exceeded. The second option uses the sensor to keep a
constant set temperature in the floor. For either option when there is a call for heat the thermostat
signals the circulator which causes heated fluid to enter the radiant system.
NIBCO
®
Radiant Panel Model RHP-1
Room Temperature
Control
<<< (Hs) Heat Source
>>> (Hr) Return to Heat
This is a representative panel. Your model may differ slightly.
RHP-2 Panel is very similar but utilizes 1” TMV instead of 3/4”.
Return from Floor >>>
Supply to Floor <<<
5
4
3
2
1
6