NI PXIe-7975, Начало работы

Страница: 7 / 18

Refer to the LabVIEW Real-Time Module Release and Upgrade Notes for
system requirements, installation instructions, and additional information
about using the LabVIEW Real-Time Module.
4. Install NI FlexRIO.
Refer to the NI FlexRIO Readme on the NI FlexRIO installation media for
system requirements and installation instructions for NI FlexRIO Support.
Documentation for NI FlexRIO Support is available at ni.com/manuals and by
selecting
Start
>
All Programs
>
National Instruments
>
NI FlexRIO
.
Note
If you are not using an adapter module, skip step 5.
5. Install NI FlexRIO Adapter Module Support.
Refer to the NI FlexRIO Adapter Module Support Readme on the NI FlexRIO
Adapter Module Support installation media for system requirements and
installation instructions. Documentation for NI FlexRIO Adapter Module
Support is available at
ni.com/manuals and by selecting
Start
>
All Programs
>
National Instruments
>
NI FlexRIO
>
NI FlexRIO Adapter Module
Documentation
.
Installing the NI FlexRIO Devices
Note
You must install the software before installing the hardware.
Unpacking
The NI 7975R modules ship in antistatic packages to prevent electrostatic discharge
from damaging module components. To prevent such damage when handling the
modules, ground yourself using a grounding strap or by holding a grounded object,
such as your computer chassis, and complete the following steps:
1. Touch the antistatic package to a metal part of the computer chassis before
removing the module from the package.
Caution
Never touch the exposed pins of connectors.
© National Instruments
7
PXIe-7975 Getting Started