© National Instruments
|
2-5
Figure 2-3.
Installing a PXIe System Controller
5.
When you begin to feel resistance, push up on the injector/ejector handle to seat the system
controller fully into the chassis frame. Secure the system controller front panel to the
chassis using the system controller front-panel mounting screws.
6.
Connect the keyboard, mouse, and monitor to the appropriate connectors. Connect devices
to ports as required by your system configuration.
7.
Power on the chassis. Verify that the system controller boots. If the system controller does
not boot, refer to your system controller user manual.
Figure 2-4 shows a PXI Express system controller installed in the system controller slot of a
NI PXIe-1082DC chassis. You can place CompactPCI, CompactPCI Express, PXI, or
PXI Express modules in other slots depending on the slot type.
1
NI PXI Express System Controller
2
NI PXIe-1082DC Chassis
3
Injector/Ejector Handle
4
System Controller Front Panel Mounting Screws (4x)
4
1
3
2
NI PXIe-1
082DC
