NI PXI-8108 страница 30 Скачать руководство пользователя | Manualshive

Страница: 30 / 86

background image

Chapter 2

Installation and Configuration

©

National Instruments Corporation

2-15

NI PXI-8108 User Manual

Save & Exit Menu

The

Save & Exit

setup menu includes all available options for exiting,

saving, and loading the BIOS default configuration. As an alternative to
this screen, press <F9> to load optimal BIOS default settings and <F10> to
save changes and exit setup.

The

Exit

setup menu includes the following settings:

•

Save Changes and Reset

—Any changes made to BIOS settings are

stored in NVRAM. The setup program then exits and reboots the
controller. The <F10> key can also be used to select this option.

•

Discard Changes and Reset

—Any changes made to BIOS settings

during this session of the BIOS setup program are discarded. The setup
program then exits and reboots the controller. The <Esc> key can also
be used to select this option.

•

Save Changes

—Changes made to BIOS settings during this session

are committed to NVRAM. The setup program remains active,
allowing further changes.

•

Discard Changes

—Any changes made to BIOS settings during this

session of the BIOS setup program are discarded. The BIOS setup
continues to be active.

•

Restore Factory Defaults

—This option restores all BIOS settings to

the factory default. This option is useful if the controller exhibits
unpredictable behavior due to an incorrect or inappropriate BIOS
setting. Notice that any nondefault settings such as boot order,
passwords, and so on, are also restored to their factory defaults.
The <F9> key can also be used to select this option.

•

Save As User Defaults

—This option saves a copy of the current BIOS

settings as the User Defaults. This option is useful for preserving
custom BIOS setup configurations.

•

Restore User Defaults

—This option restores all BIOS settings to the

user defaults. This option is useful for restoring previously preserved
custom BIOS setup configurations.

•

Boot Override

—This option lists all possible bootable devices and

allows the user to override the

Boot Option Priorities

list for the

current boot. If no changes have been made to the BIOS setup options,
the system will continue booting to the selected device without
first rebooting. If BIOS setup options have been changed and saved,
a reboot will be required and the boot override selection will not be
valid.

«
...
28
29
30
31
32
...
»

Содержание PXI-8108























































































Отзывы:

Нет отзывов

Похожие инструкции для PXI-8108

ControlMaster CM15

Бренд: ABB Страницы: 28

Бренд: ABATEC Страницы: 8

Бренд: M&C Страницы: 16

Бренд: Hansen Страницы: 4

Бренд: IBM Страницы: 144

Бренд: Taie Страницы: 66

Бренд: Baby Jogger Страницы: 24

Бренд: Baby Jogger Страницы: 16

city select LUX

Бренд: Baby Jogger Страницы: 20

CITY ELITE SINGLE

Бренд: Baby Jogger Страницы: 24

Бренд: Baby Jogger Страницы: 147

Бренд: Bang & Olufsen Страницы: 36

Бренд: Mad Catz Страницы: 4

Бренд: CAME Страницы: 98

Бренд: CAME Страницы: 16

Бренд: CAME Страницы: 8

Elemec3 013-02-0095-002

Бренд: GAI-Tronics Страницы: 12

MorphoAccess SIGMA Extreme Series

Бренд: Safran Страницы: 79

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды