backshell kit with the 16-position screw terminal
connector on the NI 9228.
When connecting all 16 terminals, the total maximum wire
diameter including insulation must not exceed 2.3 mm (0.09 in.)
per wire in order to fit through the 11.0 mm (0.43 in.) opening on
the NI 9939.
When connecting all 16 terminals using the cable retainer, the
total maximum wire diameter including insulation must not
exceed 1.6 mm (0.06 in.) per wire in order to fit under the
7.6 mm (0.30 in.) clearance of the NI 9939 cable retainer.
Figure 1. NI 9939 Wire Clearance Dimensions
11 mm (0.43 in.)
7.6 mm (0.30 in.)
Complete the appropriate procedure based on the total maximum
wire diameter used.
NI 9228 Getting Started Guide
|
© National Instruments
|
15
