NI Climbing Frames Triple 6 foot double climbing frame, Руководство по сборке

Страница: 4 / 17

pg. 4

Now with the 200mm index screws provided, screw the poles together on both sides,
making sure the index screw is tightened into place

Make a mark 900mm from the bottom of both 10ft posts

Using the 1755mm 3”x1 ½” timber and using the 65mm decking screws screw the timber to
the frame (this is to strengthen the H-frame structure, without this additional support at the
bottom the frame will twist once it is lifted up)

Using another 1755mm 3”x1 ½” timber place this on the 40° angle (on the top of the post)
and screw into place using the 65mm decking screws

Both of the above steps strengthen the H-frame structure, without this additional support at
the top and bottom the frame will twist once it is lifted up

Repeat the above steps for all the H-frames
Step 3: Base assembly (requires heavy lifting, please use at least 2 people)

Lift both ‘H’-frames into the holes that have been dug out in the ground

Make sure the tops of these ‘H’-frames have the correct angle pointing in (to ensure that the
roof will be able to rest on the tops)

To ensure that the base fits into place use the 1571mm 3x1 ½” timber provided to connect
the 2 ‘H’-frames together