NI Climbing Frames Triple 6 foot double climbing frame, Руководство по сборке

Страница: 2 / 17

pg. 2
Assembly instructions for Triple 6 foot double
climbing frame
Materials provided
:
12 x 10ft posts cut at an angle of 40 degrees (for main towers)
2 x 10ft posts cut at an angle of 60 degrees (with the top already prepared for the swing pole)
1 x 10ft post for the swing pole
6 x 1571mm posts
6 x 6ftx4ft fence panels
12 x ‘v’ boards for roof module (4 small and 4 larger ones)
2 x steps
3 x 1755mm x 1755mm base
7 x 1571mm 3”x1 ½” timber
4 x 1571mm 3”x3” timber
12 x 1755mm 3”x1 ½” timber
12 sets of railings
Slats for Rope Bridge
4 x 2600mm 3”x3” timbers
2 x rock wall
1 x cargo Net
1 x Fireman’s pole
10ft slide
Accessories (swings, grab-handles, 6 x ‘o’ hooks, telescope, periscope, steering wheel, pirates wheel)
Screws etc (30 x 200mm index screws, 35 x 120mm screws, 1 box 65mm decking screws, u-nails, 44 bolt cover
caps)
For Picnic table you will also receive the following :
20 x 1571mm 3”x1 ½” timbers
2 x 1755mm 3”x1 ½” timbers