NI Climbing Frames Rocky's Climber, Инструкция по эксплуатации

Страница: 18 / 31

NOTE: At this point if your frame has an enclosed bottom you should have received tongue and
groove, extra 3” x 1.5” timbers and 40mm screws to make the enclosed bottom. Secure the tongue
and groove to the posts from the ground up to the platform using 40m m screws and secure 3” x
1.5” timber braces to the tongue and groove on the inside of the enclosed bottom. There are
different ways to make the enclosed bottom, it is up to you, which way to install it, however, you
should not tongue and groove the area where the rock wall is to be placed.
You can now cut out a door and window in the tongue and groove.
Once the enclosed bottom is finished you can follow the rest of the instructions the same as for
the frame without the enclosed bottom.