Step 14: Monkey Bar Module Assembly
•
Lay out the 2 posts on a flat surface
•
Attach the 420mm post to the top of the posts as shown, using the 200mm screws. Please
ensure that the 420mm post is flush with the cut on the top of each 3m post
Step 15:
•
Attach a piece of 1755mm x 3” x 1.5” across the middle of the A
-frame to hold it in its place
when lifted. To position this, mark 900mm down from the top of each post and line up the
top of the 1755mm timber to each of these lines
