NHRC NHRC-Remote+, Руководство по программированию и эксплуатации

Страница: 5 / 18

NHRC- Programming and Operations Guide
3.2.2 Programming the Morse Code ID
The NHRC- can send a Morse Code ID message to meet FCC requirements for transmitter identification.
The Morse Code ID can be programmed with up to 15 Morse Code symbols.
Use the table to find the codes for each symbol you want to program into the Morse Code ID message.
Morse Code Character Table
letter code
0 00
1 01
2 02
3 03
4 04
5 05
6 06
7 07
8 08
9 09
a 21
b 22
c 23
d 31
e 32
f 33
g 41
h 42
i 43
letter code
j 51
k 52
l 53
m 61
n 62
o 63
p 71
q 70
r 72
s 73
t 81
u 82
v 83
w 91
x 92
y 93
z 90
space 11
/ 12
3.2.2.1 Examples
All of these examples assume that the “Program the Morse Code ID” command has not been reprogrammed to
something other than the factory default of “*1”. If the “Program Morse Code ID” command has been re-
programmed to something other than *1, replace *1 with the new command code in the examples shown below.
To program the Morse Code ID to “REMOTE PLUS”, send the following DTMF tones:
*1 72 32 61 63 81 31 11 71 53 82 73
The spaces are shown for clarity, you do not need to send them.
To play the Morse Code ID, send the following DTMF tones:
*01
Copyright © 2011, NHRC LLC, All rights reserved. Page 5