NHP Terasaki TemBreak PRO P SE Series, Руководство пользователя

Страница: 98 / 122

Commissioning
98
TemBreak PRO
P_SE-UM-001-EN
– V1.2.0
Navigation and Settings After the First Setup
After setting the max I
r
setpoint (I
r
dial), it is necessary to:
-
Set the other protection parameters for the circuit breaker
-
Set the trip unit clock
Below uses I
r
as an example for setting all other protection settings. Refer to Protection Settings section for more information in additional settings.
Action Note / Illustration
1
Open the transparent flap in order to access the unlock
button.
2
Move the joystick to the left or right to select the menu
(Protection or Configuration)
containing the parameter to be set.
3
Press the centre of the joystick to access the menu.
4
Move the joystick upwards or downwards to select the
parameter to be set.
5
Briefly press the unlock button using a rounded tip such as
a ballpoint pen.
Note:
The embedded display automatically switches to Unlocked mode. The parameter
icon found to the left of the value to be set is then displayed in inverted colours.