ENGLISH
3
CAUTION!!
The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this
equipment. Such modifications could void the user authority
to operate the equipment.
INSTALLATION
1. Plug the Nano receiver into a USB port of your computer.
2. Push the Battery Cover Switch aside, open the battery door
and install battery, then close the battery cover.
RECEIVER STORAGE AND
ON/OFF THE MOUSE
1. You can store or take out the Nano receiver from the Nano
receiver storage by push/pull the Nano receiver.
2. You can switch On or shut off the mouse by use the ON/OFF
switch on the bottom of the mouse.
SPEED CONTROL
Press the CPI button and you can toggle the CPI between 800
CPI and 1600 CPI.
TROUBLE SHOOTING
1. Check Nano receiver connection; try to insert Nano Receiver to
another USB port on your computer.
2. Check to see if the batteries in the mouse are installed
correctly. Make sure the polarity of the batteries corresponds
with the polarity signs in the battery compartment.
3. Replace the batteries to make sure the batteries are not low
on power.
