NF wf1966, Инструкция по эксплуатации

Страница: 88 / 198

4.2 Sweep
4-26
WF1966
• START-STATE and STOP-STATE : Set output to start and stop values, respectively. Since sweep
synchronization output becomes the respective start and stop
states, full-scale adjustments of the recorder and the status of
external equipment can be checked. START-STATE is the
same as pressing the
STOP
key (during a continuous
sweep).
Relationship between sweep values and sweep synchronization
output,
“4.2 Sweep (
■
Sweep value and marker/sync/
X-DRIVE output)”, cf.
• If the sweep type (TYPE) is set to DUTY, the output waveform automatically becomes a squarewave
(variable duty). This makes it impossible to select the waveform (FUNCTION).
Multiple pulses may be output in one cycle during sweep, as shown below.
• During sweep, if the oscillation mode of the other channel is changed, sweep stops.
• To manually operate sweep (start, stop, pause, restart) for both channels simultaneously or to
operate sweep via remote control (GPIB or USB), set both channels to sweep mode and set
OPER-COMMON to on.
O F F O N
A
-
S W P
：
3
O P E R - C O M M O N