NF wf1966, Инструкция по эксплуатации

Страница: 155 / 198

5.5 Other settings
WF1966
5-27
•
φ
SYNC is valid only when the oscillation mode is NORMAL. In other modes, the phase may
shift 180 degrees from the setting value, or mark cycles/space cycles may be different from those
occurring during burst oscillation.
• The phase between outputs of units in synchronized operation is the difference of the phase
setting (PHASE) set for each unit (channel).
„
Copy settings between channels (
SYSTEM
: COPY1
→
2 / COPY2
→
1 )
Operation to copy settings from CH1 to CH2 (or vice versa) is described.
Operation:
① Press the
SYSTEM
key, then the and keys to produce the following display (COPY 1
→
2 flashes).
C O P Y C H 1
→
C H 2
S Y S T E M :
3
L O A D C O P Y 1
→
2 C O P Y 2
→
1
4
② Press the
ENTER
key, COPY CH1
→
CH2 flashes. Then again press the
ENTER
key to copy
between the channels.
This completes setting copy.
To copy from CH2 to CH1, at above step
①
, flash COPY 2
→
1.
Other:
• The following items do not change before and after copying.
• Channel select
• Output on/off
• Arbitrary waveform related
• User units related
＊ : When the copy from settings are user units, the copy to settings are also
user units. When user units are used for the respective channel settings
(formula, name, coefficient, offset), the settings are determined so as to
provide uniform final output values.
• Type of remote control
• GPIB parameter
• USB ID