3
5
4
Installing horizontal brackets
1. On the left side of the frame, position the left L-shape bracket
between the front and rear sections of the enclosure.
2. Select the mounting height inside the enclosure.
3. Proceed to insert the M6 cage nuts into the selected mounting
holes of the rail.
4. Align the oval perforation of the L-bracket (shorter side) with the
square mounting holes on the rail and secure it using the supplied
M6x12 screws and the M6 cage nuts.
5. Repeat steps 1 through 4 for installing the right side.
L-shaped bracket (2)
M6x12 screws (4)
M6 cage nuts (4)
16
17
7
Rear panel
1. Align the back panel tab with the slot on the bottom frame.
Rear panel
Mounting bracket
8
9
3. Make sure to place the left vertical rails in their upright position,
having the rack unit numbers shown from high (top) to low (bottom).
4. In addition, the row of numbers on each vertical rail must be facing
each other on the front and rear sections of the assembly.
5. To secure the left vertical rail to the enclosure, insert the supplied
M5 self-tapping screws in the corresponding mounting holes on the
frame.
Note: make sure not to fully-tighen the first screw (front and rear
sections) until the second screw on the vertical rail has been inserted.
When done, proceed to firmly tighten both screws in every fastening
point.
6. Repeat steps from 1 through 5 in order to install the right vertical
rails.
Vertical right rails (2)
M5x8mm self-tapping screws (8)
20
11
Vertical rails installation
1. Position the left vertical rails between the front and rear frames.
2. Align the mouning holes of the left vertical rails with the mounting
holes located on the top and bottom of the frame assembly, as per
the image below.
Note: the position of the mounting holes must match the ones on
the top and bottom to avoid misalignment.
Frame assembly
Vertical left rails (2)
10
Содержание NPC-F12U64B
Страница 9: ......
