Nexxt NOVA300 AML02304U1 Скачать руководство пользователя страница 36

Страница: 36 / 75

Nova300 - ADSL wireless modem router

Note

IPv6 address can only be Aggregatable Global Unicast Addresses and Unique

Local Address. Link-Local Unicast Addresses and Multicast Addresses are not permitted.

The IPv6 address must be entered with a prefix length.

• Interface Address (prefix length is required): Enter the interface address.

Tip

If you change the LAN IP address of the device, you will lose your connection to the device. You

must type the new IP address into your browser address field to log in to the device and set all

gateway addresses of the LAN PCs to this new address to access Internet. Be sure to write the new

address on a sticky label and attach it to the bottom of the unit. You will need the new address to log

in to the device in the future.

Static LAN IPv6 Address Configuration

IPv6 LAN Applications

•

Enable DHCPv6 Server:

Check to enable the DHCPv6 Server.

- Stateless:

If selected, IPv6 clients will generate IPv6 addresses automatically based on the

Prefix Delegation's IPv6 prefix and their own MAC addresses.

- Stateful:

Stateful DHCPv6 is supported based on the assumption of prefix length less than 64.

Select this option and configure the start/end interface ID and leased time. The router will

automatically assign IPv6 addresses to IPv6 clients.

- Leased Time (hour):

The lease time is a time length that the IP address is assigned to each

device before it is refreshed.

- Start interface ID/End interface ID:

Specify the start/end interface ID Interface ID does NOT

support ZERO COMPRESSION "::". Please enter the complete information. For example: Please

enter "0:0:0:2" instead of ":2".

•

Enable RADVD:

The RADVD (Router Advertisement Daemon) implements link-local advertisements of

IPv6 router addresses and IPv6 routing prefixes using the Neighbor Discovery Protocol (NDP) and is used

by system administrators in stateless autoconfiguration methods of network hosts on Internet Protocol

version 6 networks. Check the checkbox to enable the RADVD.

- Enable ULA Prefix Advertisement:

If enabled, the router will advertise ULA prefix periodically.

- Randomly Generate:

If selected, address prefix can be automatically generated.

Statically Configure: If you select this option, you need to manually configure the address prefix

and life time.

- Prefix:

Specify the prefix.

- Preferred Life Time (hour):

Specify the preferred life time in hour.

- Valid Life Time (hour):

Specify the valid life time in hour.

•

Enable MLD Snooping:

MLD is used by IPv6 routers for discovering multicast listeners on a directly

attached link. If disabled on layer2 devices, IPv6 multicast data packets will be broadcast on the entire

layer2; if enabled, these packets will be multicast to only specified recipient instead of being broadcast on

the entire layer2.

The Virtual Server is useful for web servers, ftp servers, e-mail servers, gaming and other specialized

Internet applications. When you enable the Virtual Server, the communication requests from the Internet

to your router’s WAN port will be forwarded to the specified LAN IP address.

To enter the virtual server screen, click

NAT -> Virtual Server

and then click the

Add

button to add

rules.

Virtual Server

4.2.4 NAT

This section explais the following:

•

Virtual Server

•

Port Triggering

•

DMZ Host

Содержание NOVA300 AML02304U1












































































Результаты поиска

Содержание NOVA300 AML02304U1

Отзывы:

Похожие инструкции для NOVA300 AML02304U1

Бренды по названию

Популярные бренды

Nexxt NOVA300 AML02304U1, Руководство пользователя

Результаты поиска

Содержание NOVA300 AML02304U1

Отзывы:

Похожие инструкции для NOVA300 AML02304U1

Бренды по названию

Популярные бренды