Nexxt NOVA300 AML02304U1 Скачать руководство пользователя страница 11

Страница: 11 / 75

Nova300 - ADSL wireless modem router

The Ethernet port configured here is to function as a WAN port. Only one LAN port can be configured as

the WAN port at a time. After you finish your settings, click the Apply/Save button and then refer to To

setup WAN Service for ETH Interface to configure the WAN service for Internet access.

Tip

eth0, eth1, eth3 and eth3 respectively represent the LAN port1, LAN port2, LAN port3 and LAN

port4 of the device.

To set up the ETH interface

To setup WAN service for ATM interface

Select

ETH Interface

and click

Add

to configure it.

4.2.2 WAN service

This router provides two WAN services:

- WAN Service for ATM Interface (ADSL uplink)

- WAN Service for ETH Interface (Ethernet uplink)

If you configured the

ATM Interface

(ADSL uplink), follow steps below to configure the WAN service:

Click

Advanced Setup

WAN Service

and then click the

Add

button. Select the interface you have

configured. Depending on the type of connection, you will come to different screens and be prompted to

enter your ISP settings accordingly. Select one connection type from the five internet connection types as

shown in the following table (If you are unsure, consult your ISP).

Internet connection type

ISP Information

Enter the ISP login user name and password.

If you cannot locate this information, ask your ISP

to provide it.

No entries are needed.

Enter the assigned IP address, subnet mask, and the IP

address of your ISP’s primary DNS server. This informa-

tion should have been provided to you by your ISP. If a

secondary DNS server address is available, enter it

also.

Enter the assigned IP address, subnet mask, and the IP

address of your ISP’s primary DNS server. This informa-

tion should have been provided to you by your ISP. If a

secondary DNS server address is available, enter it

also.

If you wish to initiate a dialup directly from your PC for

internet access or enjoy the entire Internet connection

(instead of sharing it with others), you can select the

Bridging

and then click

Next

Dynamic IP

Static (Fixed) IP

PPPoE PPPoA

IPoE

(If your ISP uses DHCP to

assign your IP address or

if your ISP assigns you a

static (fixed) IP address, IP

subnet mask and the

gateway IP address, you

need to select the IP over

Ethernet (IPoE).

IPoA

Bridging

Содержание NOVA300 AML02304U1












































































Результаты поиска

Содержание NOVA300 AML02304U1

Отзывы:

Похожие инструкции для NOVA300 AML02304U1

Бренды по названию

Популярные бренды

Nexxt NOVA300 AML02304U1, Руководство пользователя

Результаты поиска

Содержание NOVA300 AML02304U1

Отзывы:

Похожие инструкции для NOVA300 AML02304U1

Бренды по названию

Популярные бренды