Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter
7
Step 2:
Connect the other end of the network cable
to the Ethernet switch, router or IP sharing device.
Step 3:
Plug the power cable to the wall outlet and
turn on the device.
3. The camera can also be connected to a
computer directly.
Step 1:
Connect one end of the network cable to
RJ45 interface of IP camera
Step 2:
Plug the power adapter to the DC jack of
the IP camera and turn it on.
4. Continue with the setup of the camera (as
described in the following chapter). Once the
camera has been successfully connected to your
network, it can be mounted on the wall or ceiling
using the wall plugs and screws included with the
device. (The camera set up must be performed
using Windows operating system only.
Computer
IP Camera
Direct Connect
