Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter
45
your settings. Since the camera will restart at this
time, the network cable must be unplugged. After
rebooting, you can access the camera again using
the correct device.
PPPoE Settings
This is used to set up the Point-to-Point Protocol
over Ethernet
(PPPoE)
parameters. If utilizing this
service, please make sure your modem is
connected to the computer and that the correct
user name and password have been entered, as
seen below under the PPPoE settings screen:
UPnP Settings
When the UPnP function is enabled, port forwarding
on the router can be setup.
DDNS Service Settings
If you want to remotely access an IP camera that
does not have a static external IP address, by
