Nexus X-BLUE, Руководство по эксплуатации, Страница: 8 / 16

14 15
How to Use
1. POWER UP YOUR IONIZER.
- Depress the black power button located on the back of the ionizer to the
"ON" position.
- The black power button is ALWAYS left on. Your ionizer will "go to sleep" in
between uses and
"wake up" when it detects water flow again. It will always return to your last
selected setting.
- You will hear a single chime and the display panel will illuminate for 2-3 seconds.
- With the power on and the display panel dark, your ionizer is now in standby mode.
2. START WATER FLOW THROUGH YOUR IONIZER
a. SET THE FLOW CONTROL VALVE - This control is on the front of machine
and has an "ON" and "OFF" position. Try initially setting this half way
between "ON' and "OFF".
This control WILL DIRECTLY impact the performance of your ionizer.
A slow flow will yield higher pH; a fast flow will yield lower pH.
b. Turn on your water faucet. Turn the lever to until you "divert" the water through your ionizer.
c. Get the feel for the difference in flow rates by adjusting FLOW CONTROL VALVE from a slow
trickle to the fastest flow. When you begin ionizing the water, start with it in the medium range
and adjust faster or slower as necessary to achieve optimum results.
TO SELECT ALKALINE WATER
1. With water running through the ionizer:
2. Depress the "ALKALINE" button to select the desired setting from 1 - 4.
You will hear voice confirmation that "Alkaline water" has been selected, and the
LED Control Panel will be back-lit. The Alkaline Water Indicator
will light showing the level you have selected.
3. Note: Your ionizer will always "remember" the last setting used. If the previous selection was
Alkaline Level 2, when you start the ionizer the next time, your ionizer it will automatically
process at the same Alkaline Level 2.
4. To select a different level, depress the "ALKALINE" button to move to next level until the
desired setting level is achieved. The Alkaline Water Indicator will change accordingly.
IMPORTANT NOTES: IMPORTANT NOTES:
If you have never consumed alkaline water - do not use a setting higher than 1 to begin with.
Let your body adjust slowly and naturally for 4-7 days. After this initial adjustment period,
you may gradually increase the alkalinity of the water.
pH levels will vary according to the minerals present in the source water and water flow rate
through your ionizer.
ALKALINE
Level 1
Alkaline Water
Level 2
Alkaline Water
Level 3
Alkaline Water
Level 4
Alkaline Water