Nexus Multi Control, Инструкция по установке и эксплуатации

Страница: 65 / 83

64
12.6.4 C73 (OFF WPR)
Receive waypoints from a NMEA navigator to the Server via the
NMEA sentence WPL, (see C78, WBN).
(OFF) = Reception off. (On) = Reception on.
12.6.5 C74 (On WPT)
Transmit waypoints from the Server to a NMEA navigator via the
NMEA sentence WPL, (see C78, WBN).
The NMEA sentence WPL must be selected in one slot from C79
to C94 (See 13.1.2,).
(OFF) = Transmission off. (On) = Transmission on.
It takes approximately 200 seconds to transfer 100 waypoints.
12.6.6 C75 (OFF NAV)
Here you select which instrument is navigating.
By the term ”navigating”, we mean the active instrument in which
the waypoint memory is used to calculate the navigation data, i.e.
BTW, DTW etc. There can only be one instrument on the Nexus
Network which is navigating.
(OFF) = The Server is navigating.
One of the following NMEA position sentences must be received
for the Server to calculate navigation data: RMC, GGA, RMA or
GLL.
(On) = NMEA navigator is navigating. The Multi Control instrument
becomes a repeater of the information transmitted from the NMEA
navigator.
See 12.7.3 for the NMEA sentences received by the Server.
Note: If a Nexus GPS is connected, C75 will be ignored, that
is the Server will automatically take over the navigation no
matter how C75 is set.
12.6.7 C76 (OFF CMP)
(OFF) = Nexus compass. (On) = NMEA compass.
12.6.8 C77 (OFF WIND)
(OFF) = Nexus wind. (On) = NMEA wind.
12.6.9 C78 (00 WBN)
Waypoint block number (1 block = 100).
Example 1: To receive waypoint number 101 to 150 from a NMEA
navigator and store them in memory 1 to 50 in the Server, set C78
(WBN) to 01 and C73 (WPR) to On.
CALIBRATION