Nexus Multi Control, Инструкция по установке и эксплуатации

Страница: 64 / 83

63
12.5.8 C63 (WIA)
Select from 5 functions. (WIA) is the factory setting.
Select the function to be displayed as main-function under WIND.
The optional analogue wind instrument will display the same
selection.
Select from 5 functions. (WIA) is the factory setting.
If the selected main-function is an angle, the sub-function will
show the complimenting angle, e.g. if (AWA) is selected as main-
function, (TWA) will be shown as sub-function and vice versa.
If the selected main-function is a wind speed, the sub-function will
show the corresponding angle, e.g. if (AWS) is selected, (AWA)
will be shown as the sub-function and vice versa for (TWS) and
(TWA).
(WIA): True (TWA) or apparent wind angle (AWA).
Depending on what is set in C51, (ON = True, OFF = Apparent).
(AWA): Will display apparent wind angle (AWA) in this instrument
independent of what is set in C51.
(TWA): Will display true wind angle (TWA) in this instrument
independent of what is set in C51.
(AWS): Will display apparent wind speed (AWS) in this instrument
independent of what is set in C51.
The letters (AW) will be displayed to the right of the wind speed.
(TWS): Will display true wind speed (TWS) in this instrument
independent of what is set in C51.
The letters (TW) will be displayed to the right of the wind speed
value.
12.6 C70, calibration of Network and NMEA
When calibration code C70 is selected, the LCD arrows for all
functions will be displayed
12.6.1 C70 (RET)
To return to the normal mode, press KEY .
12.6.2 C71 (On KEY)
(On) = Sound when push buttons are pressed. (OFF) = no sound.
12.6.3 C72 (d0 SEA)
Damping of speed and course over ground (SOG/COG), affecting
the complete Nexus Network and NMEA output.
d0 = no damping. d1 = 2 sec, d2 = 5 sec, d3 = 10 sec, d4 = 20
sec, d5 = 40 sec, d6 = 1.20 min, d7 = 2.40 min, d8 = 5 min and d9
= 10 min.
CALIBRATION