background image

33

WARRANTY

GENERAL

All our products are designed and built to comply to the highest class industry standards. If
the products are correctly installed, maintained and operated, as described in the installation
and operation manual, they will provide long and reliable service. Our international Network
of distributors can provide you with the information and assistance you may require virtually
anywhere in the world.

Please read through and fill in this warranty card and send it to your national distributor
for product registration.

LIMITEDED WARRANTY

The warranty covers repair of defective parts due to faulty Manufacturing and includes labour
when repaired in the country of purchase. The warranty period is stated in the product
manual, and commences from the date of purchase. The above warranty is the
Manufacturer’s only warranty and no other terms, expressed or implied, will apply. The
Manufacturer specifically excludes the implied warranty of merchantability and fitness for a
particular purpose.

CONDITIONS

 The supplied warranty card and receipt with proof of purchase date, must be shown to

validate any warranty claim. Claims are to be made in accordance with the claims
procedure outlined below.

 The warranty is non-transferrable and extends only to the original purchaser.

 The warranty does not apply to Products from which serial numbers have been

removed, faulty installation or incorrect fusing, to conditions resulting from improper use,
external causes, including service or modifications not performed by the Manufacturer or by
its national distributors, or operation outside the environmental parameters specified for the
Product.

 The Manufacturer will not compensate for consequential damage caused directly or

indirectly by the malfunction of its equipment. The Manufacturer is not liable for any personal
damage caused as a consequence of using its equipment.

 The Manufacturer, its national distributors or dealers are not liable for charges arising

from sea trials, installation surveys or  visits to the boat to attend to the equipment, whether
under warranty or not. The right is reserved to charge for such services at an appropriate
rate.

 The Manufacturer reserves the right to replace any products returned for repair, within

the warranty period, with the nearest equivalent, if repair within a reasonable time period
should not be possible.

 The terms and conditions of the warranty as described do not affect your statutory

rights.

CLAIMS PROCEDURE

Equipment should be returned to the national distributor, or one of its appointed dealers, in
the country where it was originally purchased. Valid claims will then be serviced and
returned to the sender free of charge.

Alternatively, if the equipment is being used away from the country of purchase, it may be
returned to the national distributor, or one of its appointed dealers, in the country where it is
being used. In this case valid claims will cover parts only. Labour and return postage will be
invoiced to the sender at an appropriate rate.

DISCLAIMER

Common sense must be used at all times when navigating and the Manufacturer’s
navigation equipment should only be considered as aids to navigation.
The Manufacturers policy of continuous improvement may result in changes to product
specification without prior notice.

WARRANTY

Содержание Compass Data




































Отзывы:

Похожие инструкции для Compass Data