Nexus Compass Data, Инструкция по установке и эксплуатации

Страница: 27 / 35

26
(Not yet available, at the time for printing this manual).
When the selection roll is made, further settings in calibration can be
made to correct the offset angle. See C68 5.4.8.
When Speed TRriM [TRM] is selected, a press on the external trim button
will transmit the trim command on the Network. To be able to set both
steer
and trim reference, the optimum way is to connect one trim button
for speed to the Compass Data instrument and one trim button for steer
at the Server. Such an installation gives you the opportunity to trim both
speed and steer with separate buttons.
5.4.4 Connection of trim button
Connect the trim button as per the drawing. The
button should make a short connection when
pressed. It is also possible to connect more than
one button in parallel, for example one on
starboard and one on port side.
Article number
for the push button: 19763.
5.4.5 C74 Demo mode
The Compass Data instrument has a built in demonstration mode. All
values are simulated in this mode. It is convenient to learn the functions
of the instrument by using this mode.
Every 7th second the text DEM will appear to alert you that demo mode is
selected.
CALIBRATION