Nexus Autopilot R-1600, Инструкция по установке и эксплуатации

Страница: 25 / 54

English AUTOPILOT
8-24
An angle of 00° is the same as rudder angle limit disconnected
(OFF).
Note! Make sure [LIM] is set to 00
°
(OFF) during installation.
The rudder angle limit sets maximum angle for the rudder. If the
limit is set to 45°, it is not possible to exceed a rudder angle 45° on
either port or starboard. Check the maximum rudder angle by
turning the steering wheel to port and starboard and read the
maximum angle. If the angle is greater on one side, decrease the
smallest angle by 3°, and enter that setting as the limit.
6.4 Alarm setup group [A]
To silence an alarm, press any push button.
6.4.1 A0, Return [RET]
To return to previous mode, press SET when the text [RET] is
displayed.
6.4.2 A1, Pilot Course Alarm [PCA]
Possible settings are [OFF] and [00°-99°]. Default setting is [OFF].
When the boat’s average course differs more than the [PCA]
setting, the alarm will sound and the display will blink.
6.4.3 A2, Timer watch alarm [TMR]
Possible settings are [OFF] or [On]. Default setting is [OFF].
On = audible alarm activated.
The audible alarm will sound every 5 minutes to alert the person on
watch.
To confirm and restart the timer, press any push-button. If not
confirmed within 1 minute, the optional external alarm buzzer, if
connected to the Nexus Server, will sound for 1 minute, to alert the
rest of the crew.
6.4.4 A3, Cross Track Error alarm [XTA]
Possible settings are [0.00] = OFF to [9.99]. Default setting is [0.00].
This function is only available in NAV function when the Autopilot is
connected to a Nexus Network and a navigator is connected to the
Nexus Server.
If the pilot’s cross track error exceeds the set threshold of distance
of the track, the alarm will be activated.
6.4.5 A4, Push-button beep [KEY]
Possible settings are [OFF] or [On]. Default setting is [ON].
[On] = Sound when push buttons are pressed. [OFF] = No sound.