Nexus 21 L-50s Скачать руководство пользователя страница 4

 

 

SAFETY INFORMATION 

 

SEVERE PERSONAL INJURY AND PROPERTY DAMAGE CAN RESULT FROM IMPROPER INSTALLATION OR 

ASSEMBLY.  READ THE FOLLOWING WARNINGS BEFORE BEGINNING: 

 

 

 

 

 

 

 
 
 
 
WARNINGS:

 

1.

 

Do not use this product for any application other than those specified by Nexus 21. 

2.

 

Do not exceed the weight capacity.  This can result in serious personal injury or damage to the equipment.  It is the installer’s responsibility 
to ensure that the total combined weight of all attached components does not exceed that of the maximum figure stated.

 

3.

 

Follow all technical specifications and instructions during the installation. 

4.

 

Only use attachments/accessories specified by the manufacturer. 

5.

 

Close supervision is necessary when this system is being used by, or near, children, or disabled persons. 

6.

 

It is the responsibility of the installer to warn all potential users of the dangers of interfering with the mechanism during operation. 

7.

 

Read all technical instructions fully before installation and use.  It is the installer’s responsibility to ensure that all documentation is passed 
on the users and read fully before operation. 

8.

 

Failure to provide adequate structural strengthening, prior to installation can result in serious personal injury or damage to the equipment.  
It is the installer’s responsibility to ensure the structure to which the Lift System is affixed can support four times the weight of the system.

 

9.

 

Risk of electric shock.  Do not attempt to open the Control Box. 

10.

 

To reduce risk of fire or electric shock, do not expose parts to rain or other liquids. 

11.

 

Protect the power cord from being walked on or pinched. 

12.

 

Keep all documentation. 

13.

 

Heed all warnings. 

14.

 

Clean only with a dry cloth. 

15.

 

Refer all service questions to Nexus 21 if the system does not operate normally. 
 

Nexus 21 disclaims any liability for modifications, improper installations, or installations over the specified weight range.  Nexus 21 will not be liable for any damages 
arising out of the use of, or inability to use, Nexus 21 products.  Nexus 21 bears no responsibility for incidental or consequential damages.  This includes, but is not 
limited to, any labor charges for the servicing of Nexus 21 products performed by anyone other than Nexus 21. 
Nexus 21 intends to make this and all documentation as accurate as possible.  However, Nexus 21 makes no claim that the information contained herein covers all details, 
conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product.  The information contained in this 
document  is  subject  to  change  without  prior  notice  or  obligation  of  any  kind.    Nexus  21  makes  no  representation  of  warranty,  expressed  or  implied,  regarding  the 
information contained herein.  Nexus 21 assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.

  

 

 
 
 
 

CABINET LID HAZARD 

TV HAZARD 

CAUTION:

  

Avoid contact with the TV and Lift System during 

operation.  Use with caution. 

 

CAUTION:

  

The cabinet lid must be installed as described in the 

instructions, using the Steel Threaded Tapered Pins.  Installing 
the cabinet lid in any other fashion will create hazardous pinch 
points that can cause serious personal injury.

 

Содержание L-50s

























Отзывы: