Nexus 21 L-50s, Руководство по установке

Страница: 12 / 24

12
Assembling and Installing TV Mounting System
For these steps you will need the following parts:
•
Screen Support
•
Swivel Mechanism
•
(2) Top Support Brackets
•
Top Plate
•
Screen Back Plate
•
(2) Vertical Mounting Bars
•
Screen Locks
•
(4) 3/8” - 16 x ¾” BHMS
•
(4) 6 x 16mm BHMS
•
(8) 6 x 12mm BHMS
•
(4) 6 x 10mm BHMS (Located in Swivel Pack)
•
(4) 6 x 12mm FHMS
Step 15: Attach the Screen Support to the top of Swivel Mechanism using
(4) 6 x 10mm BHMS located in the Swivel Hardware Pack. Use the four
mounting locations that are marked with dots on the Screen Support.
Step 14a: Split the Swivel into two pieces by pulling on the Upper Section while holding the Lower Section,
then attach the Lower Section of the Swivel to the top of the Lift Column using (4) 6 x 16 BHMS Screws.
Step 14b: Place the Upper Section of the Swivel back
onto the Lower Section, then fasten the two together
by placing an Allen Key into the “Unthreaded” Holes on
the top of the Swivel.
Note: Tighten the Swivel in a “star” pattern to avoid
attaching the Swivel crooked. Ensure the blue switch is
facing towards the front of the cabinet.