Nexus 21 L-45en, Руководство по установке

Страница: 22 / 32

22
How to Install the Tapered Pins :
You will be screwing the Tapered Pins into the underside of your cabinet lid, and they will hang down and drop
into the two “Nesting Holes” in the Top Plate Bracket (Part #8).
Step 22: Before installing the
Tapered Pins , position the Cabinet Lid. With the TV and the Lift System in the
fully retracted position, set the Cabinet Lid in place. It will not be attached at this point, so move it around on
the
Top Plate Bracket , making sure it fits centered in the cabinet opening.
Step 23: Run the Lift System up and down with the Cabinet Lid sitting on top, but not attached. Without
bumping the Cabinet Lid out of place, use the Remote Control Handset to send the Lift System up and down.
Make sure that when the Lift comes down, the Cabinet Lid drops into the proper position relative to your
cabinet opening.
NOTE: You may want to temporally tape your lid, to prevent the lid from shifting.
Step 24: Mark the spots for the
Tapered Pins . Again, without bumping the Cabinet Lid out of place, run the
Lift System all the way up, with the Cabinet Lid sitting on top. Look at the underside of the Top Plate Bracket,
find the two “Nesting Holes” and use a felt-tip pen or a pencil to mark the position of the holes on the
underside surface of the Cabinet Lid
.
NOTE: Make sure the nuts on the bottom side of the Top Plate Bracket
are hand tight and centered before you mark your lid.