Nexus 21 L-45en, Руководство по установке

Страница: 12 / 32

12
Step 8: Place Lift Column inside cabinet and make sure
to center the Lift Column from left to right.
Step 9: Mount the
Control Box and controls to the wall at a nearby accessible location: Using (2) #10 x 1 ¾”
FHWS mount the Control Box to the wall. Using (2) #8 x ¾” THWS mount the Wired Back Up Switch . If you
ordered IR Controls , then you will use (2) #8 x ¾” FHWS to mount the IR Receiver . If you ordered RF Controls ,
then you will use (2) #6 x ¾” RHWS to mount the RF Receiver.
Step 10: Please refer to the IR Controls Wiring Diagram on the following page, if you ordered RF Controls
continue to page 13. Ensure that the motor cable is connected to port #1. The lift will not operate if motor
the cable is connected to ports #2 or #3.