Nexus 21 DL-50b, Руководство по установке

Страница: 21 / 24

21
Setting a Height Limit
This lift system has 39.25” of travel [extension or stoke], if your installation requires less than the maximum
travel of the system, follow the steps below to limit it:
1. Extend the lift to your desired position.
2. Tap the DOWN button to stop the lift once it reaches your desired height.
3. Plug the Height Limit Insert into an available RJ45/Phone port on either the Control Box or RF Receiver.
4. Fully retract the lift by pressing the DOWN button and extend it again to test the position.
About Lower Limits:
You cannot set a lower limit on any of our Lift Systems as the lower limit is fixed. The reason is because this is
the position in which the lift systems starts and/or initializes from. If you are having an issue where a lower
limit may seem necessary, contact Technical Support at 480-275-8613 for assistance as a lower limit should
never be necessary on any of our products due to the adjustment built into the bracketry.