Nexus 21 DL-50b, Руководство по установке

Страница: 9 / 24

9
Connecting the Lift
For these steps you will need the following parts:
•
Control Box
•
Power Cord
•
Wired Backup Switch
•
(2) 2.5m Motor Cables
•
CSI Control Kit (If IR was ordered)
•
RF Control Kit (If RF was ordered)
•
(2) #10 x 1- ¾” FHWS
•
(4)
#8 x ¾” FHWS
Step 2: Connect (1) 2.5m Motor Cables to each
pigtail at the top of each Lift Column.
Step 3: Connect one 2.5m Motor Cable to Port 1 and the other 2.5m Motor Cable to Port 2 on the Control
Box.
Step 4: Connect the Wired Backup Switch to Port A1 on the Control Box, if
you are using RF Controls. Connect the IR Receiver to Port A1 on the Control
Box, if you are using IR Controls.